![]() ![]() GRBL 0.9- Older Machines No Z Version (X Carve, Shapeoko 3, etc.)ģD Printer (Using Fan Control M106/M107) with ARCS GRBL 0.9- With Z Older Machines (X Carve, Shapeoko 3, etc.) ![]() GRBL 1.1 – Dynamic Laser Mode M4 & No Z (X Carve, Shapeoko 3, etc.) Here are the download links: *Right click “save link as” versus clicking the link * We have a couple of versions depending on the controller you use. When you make your G Code, the post processor will change all of the “retract” portions in the file where the spindle moves up to a laser OFF command. Then, you draw in V Carve Pro (or other vectric software) to get the file that you want. The basic concept is that you set up a tool in V Carve Pro (or other Vectric software) that has the laser parameters to it (the spot size is the drill bit width). It works with the desktop and the Pro versions. This post processor will work with all of the Vectric Products including Cut2D, V Carve, and Aspire. If you have a new post processor for another controller that you would like to share, just let us know! We have made now specific versions for different machine controllers. If you would like to modify it the source file can be edited with a standard text editor pretty easily. You ask and you shall receive! We started one for the X Carve, but it should not really have anything that specific in it to make it unusable for other machines as well. ![]() We have been asked by a lot of people to make a post processor to the Vectric Software so it can be used with the laser.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |